Delivering pallets of drinks in the morning, carrying a 40 ft container in the afternoon: with the Openbox C+, one semi-trailer does both. This multi-purpose, fully opening body adapts to every type of transport: containers, beverages, pallets, timber, panels and building materials, abnormal loads, vehicles.
Its structure slides along the whole deck in 30 seconds, and folds away completely in 20 minutes maximum: the curtainsider becomes a flatbed. Discover how it works phase by phase, its safety tests and its applications.
The principle: a retractable curtainsider
The Openbox C+ is based on a curtainsider body. What sets it apart: it is retractable. Instead of opening only the curtains, the whole structure, rear doors included, moves along the deck.
The roof bows and the tarpaulin gather into a compact stack at the front or rear of the semi-trailer. The load is then completely clear: nothing gets in the way of the forklift or the crane, from the side or from above.
The Openbox C+ therefore offers two main transport modes:
- fully covered curtainsider, for goods that need protection;
- body folded at the front, to load containers or large goods.
4 operating phases, one semi-trailer
Between these two modes, the body also opens in seconds for delivery work. Click on each phase to see the body move.

1. Curtainsider mode: a closed body for the road
RoadIn road configuration, the Openbox C+ is a complete curtainsider. The structure covers the whole length of the deck and protects the goods from the weather.


2. Sliding to the front: the load uncovered in 30 seconds
30 secondsTo unload, the driver slides the structure towards the front of the semi-trailer, rear doors included. The operation is fully manual and takes 30 seconds.
Fully slid, the structure clears the whole deck. The driver unloads from the side or from above, with no stanchion or tarpaulin in the way.
The structure can also stop halfway. Only the pallets to be delivered are uncovered; the rest of the load stays protected.

3. Sliding to the rear: adapting to every delivery site
30 secondsThe same operation works in the other direction. The structure slides to the rear and frees the front of the deck, again in 30 seconds.
The driver chooses the opening direction according to the layout of the delivery site and the position of the pallets to unload.

4. Flatbed mode: a container carrier in 20 minutes maximum
20 minutes maxFor loads that no curtainsider can take, the Openbox C+ switches to flatbed mode. The structure folds away completely at the front and frees 12,270 mm of deck.
It takes 20 minutes maximum to turn the curtainsider into a flatbed able to carry a 40 ft container. Flatbed mode opens the semi-trailer to new freight: shipping containers, long or bulky goods, crane-handled loads.
One body for every type of transport
As a multi-purpose body, the Openbox C+ adapts to any type of transport, from general cargo to abnormal loads:
- Containers: in flatbed mode, the body folded at the front leaves room for one 40 ft container or two 20 ft containers.
- Beverages: the body is approved for beverage transport and opens in 30 seconds at every stop of the round.
- Pallets: full opening, loading and unloading from the side, from above or from the rear.
- Timber: long loads are loaded from the side or from above, with no stanchion in the way.
- Panels and building materials: the clear deck takes bulky loads handled by forklift or crane.
- Abnormal loads: in flatbed mode, the semi-trailer carries oversized goods.
- Vehicles: the clear deck allows vehicles and machinery to be transported.
20 years of Openbox C+: nearly 800 bodies on the road in just 9 years
The Openbox C+ celebrates its 20th anniversary in 2026. For twenty years, this retractable curtainsider concept has been on the road, serving hauliers in every sector.
In the last nine years alone, 776 Openbox C+ have been put on the road: nearly 800 bodies carrying containers, beverages, timber and building materials. This is the best proof of the concept’s reliability, and of the trust our customers place in us.
From curtainsider to flatbed in 20 minutes: the conversion on video
Switching to flatbed mode is done manually, in 20 minutes maximum. Watch the complete conversion of the Openbox C+, from curtainsider to a flatbed ready to take a container:
Once the goods are delivered, the reverse operation restores a curtainsider, ready for the next load.
The Openbox C+ in the field, with our customers
Containers, beverages, timber, building materials, abnormal loads: here are a few of these Openbox C+ in operation with our customers.
Rigid truck and trailerThe C+ system on a rigid truck and trailer
The C+ system is not limited to semi-trailers: it is also fitted to rigid trucks and their drawbar trailers, for the same versatility on a road train.
ContainersFlatbed mode: a 40 ft container on board
With the structure folded at the front, the Openbox C+ frees 12,270 mm of deck: enough room for a 40 ft container.
Agricultural machineryFlatbed mode: agricultural machinery carried flat
The clear deck takes agricultural machinery. Once the tarpaulin is back in place, the same semi-trailer leaves with a different load.
DeliverySliding to the front: the load uncovered
Structure slid to the front in 30 seconds: the load is accessible from the side, with no stanchion or tarpaulin in the way.
Extendable chassisThe C+ system on an extendable chassis
The C+ system also fits extendable (telescopic) semi-trailers, for the longest loads.
OversizedExtra long: 16,870 mm internal length
On this extra-long semi-trailer, the Openbox C+ offers 16,870 mm of internal length and 2,420 mm of internal width for oversized loads.
Load securing: a body certified to EN 12642 code XL
The Openbox C+ is the first retractable curtainsider in Europe to have passed the EN 12642 code XL tests.
This European standard sets the strength requirements for commercial vehicle bodies to secure the load. A code XL body must restrain 50% of the payload at the front wall, 40% at the side walls and 30% at the rear wall.
For a body that slides and folds away, passing these tests was no small feat. Watch the test on video:
The body is also approved for beverage transport, adding even more versatility.
Fewer empty runs, a lower carbon footprint
A truck returning empty burns fuel without carrying any goods. With a specialised body, this is often unavoidable: a curtainsider cannot take a container on the return trip, and a container chassis cannot deliver pallets of drinks.
The Openbox C+ removes this constraint. Curtainsider on the way out, flatbed on the way back, or the other way round: it can take a different load on every trip. Fewer empty kilometres mean less fuel burned and a lower carbon footprint for the haulier and its customers.
The advantages of the Openbox C+
- A proven concept. 20 years on the market and 776 Openbox C+ put on the road since 2017.
- One semi-trailer for every type of transport. Less specialised equipment in the fleet, more chances to load on the return trip.
- 30 seconds to open. In delivery work, the load is accessible almost instantly at every stop.
- Full opening. Loading and unloading from the side, from above or from the rear, depending on the dock and the handling equipment.
- Certified load securing. EN 12642 code XL, a first in Europe for a retractable curtainsider.
- 100% manual operation. No motor and no on-board power: the body stays simple to use and maintain.
- Designed and built in France. The Openbox C+ is designed by our design office and built in our plants in Saint-Maixent-l’École and Augé.
Key specifications
| Type | Retractable curtainsider, multi-purpose with full opening |
|---|---|
| Vehicles | Semi-trailers, rigid trucks, drawbar trailers, swap body chassis |
| Modes | Curtainsider, sliding to the front, sliding to the rear, flatbed |
| Opening for delivery | 30 seconds |
| Conversion to flatbed | 20 minutes maximum |
| Operation | Manual |
| Load securing | EN 12642 code XL |
| Approval | Beverage transport |
| Internal length | 13,610 mm (example on a semi-trailer) |
| Deck length | 12,270 mm |
| Flatbed capacity | 1 × 40 ft container |
| Applications | Containers, beverages, pallets, timber, panels and building materials, abnormal loads, vehicles |
| Track record | 20 years, 776 Openbox C+ put on the road in 9 years |
| Manufacturing | France (Deux-Sèvres) |
All specifications on the Openbox C+ product page.
Frequently asked questions about the Openbox C+
How long has the Openbox C+ existed?
The Openbox C+ celebrates its 20th anniversary in 2026. Over the last nine years, 776 units have been put on the road.
How long does it take to open the Openbox C+?
30 seconds to slide the structure to the front or the rear in delivery mode. Converting to flatbed mode takes 20 minutes maximum.
What is the EN 12642 code XL standard?
It is the European standard defining the strength of vehicle bodies for load securing. Under code XL, the body restrains 50% of the payload at the front, 40% at the sides and 30% at the rear. The Openbox C+ is the first retractable curtainsider in Europe to have passed these tests.
Can a curtainsider carry a container?
Yes, the Openbox C+ can. In flatbed mode, the structure folds away completely at the front and leaves room for one 40 ft container.
What goods can the Openbox C+ carry?
Containers, beverages, pallets, timber, panels and building materials, abnormal loads and vehicles: the body adapts to general cargo as well as oversized goods.
Is the Openbox C+ motorised?
No. All operations are manual, with no motor and no on-board power.
Which vehicles can be fitted with the Openbox C+?
Semi-trailers, rigid trucks, drawbar trailers and swap body chassis. Our design office adapts the body to your chassis during the study.
Is the Openbox C+ for delivery work available as a pre-assembled body kit?
Yes. The Openbox C+ for delivery work can be delivered ready to fit to your body builder. Find out more in our article on pre-assembled body kits.